Bulky

Conversion Kit Bulky
Sort By:  
  • Bulky HLW Helix Level Wind Conversion Kit (J011)
    Babe's Bulky Spinning Wheel Patent Pending HLW Conversion Kit.
    What is a Helix?

    A helix is a rod that has treads going to the right and to the left so a nut will travel back and forth enabling you to use it to keep yarn level on a bobbin and that is why it is called level wind.  When spinning you never have to stop and move from one hook to another hook.

    This kit comes with the parts to make any of the Babe's Bulky Spinning Wheels level wind the yarn unto the bobbins eliminating moving the yarn from hook to hook and no more ridges and valleys.  Very simple to use.

    These will be install free of charge if purchased with a wheel or with a few tools you can install your own.

    On backorder. Please call for information.

     
  • Bulky Production Double Treadle - Black (A0504501)
    Babe's Bulky Spinning Wheel bobbins each hold two full pounds of your bulky handspun! Three bobbins are included with this production-sized wheel.
    Babe's Bulky Spinning Wheel is a Production double treadle wheel. Maiden has a 3/4" orifice, 30" from the floor. Spinning ratio is 4.25:1 and a optional 2.75:1 whorl. Available in white or Black.

    Because of the large center core of the bobbin It can also spin lace weight yarn.

    Babe's Bulky Spinning Wheel is made with furniture PVC, a wheelchair wheel with ball bearings for effortless treadling, and a polyurethane drive band. Like all Babe's wheels, Babe's Bulky Spinner is extremely portable, durable, and affordable. Great for spinning outdoors in fine weather!

    Great For:

    Rug Yarns
    Craft Yarns
    The Latest Bulky Knitting Fashions
    Plying large skeins
    Spinning Lace weight yarn.

    On backorder. Please call for information.

     
  • Bulky Production Flyer Lead Coversion Kit (A109)

    Will fit any production wheel or fiber starter wheel. Comes with a total of 3 bobbins.

    Reading Material

    Bobbin Lead and Flyer Lead Explained
     

    On backorder. Please call for information.

     

     

  • Bulky Wheel Delta Conversion Kit (J008)

    Babe's Bulky Production Wheel Conversion Kit to a Delta Flyer

    Delta Conversion kit for a Bulky Production Wheel which uses supports and bobbins that came with wheel.
    Consists of only the maiden, Delta flyer with 2" orifice, 72" drive band and whorl.

    On backorder. Please call for information.

     
  • Bulky Wheel Delta Conversion Kit - Black (J008BYB)

    Babe's Bulky Production Wheel Conversion Kit to a Delta Flyer

    Delta Conversion kit for a Bulky Production Wheel which uses supports and bobbins that came with wheel.
    Consists of only the maiden, Delta flyer with 2" orifice, 72" drive band and whorl.

    Black

    On backorder. Please call for information.

     
  • Bulky Wheel Delta Conversion Kit - White (J008BYW)

    Babe's Bulky Production Wheel Conversion Kit to a Delta Flyer

    Delta Conversion kit for a Bulky Production Wheel which uses supports and bobbins that came with wheel.
    Consists of only the maiden, Delta flyer with 2" orifice, 72" drive band and whorl.

    White.

    On backorder. Please call for information.

     
  • Flyer Lead Conversion Kit Black (A105)

    Because of the numerous requests I received the Babe's Flyer Lead Wonder (scotch) Tension spinning wheel was invented, and does it every spin nice with easy adjustment to take up and easy to control the twist. The ratio of the whorl is 7:1

    The conversion kit consists of the maiden with Velcro, NW flyer with whorl and the wonder tension control. Bobbins are optional. Pictured with a standard 5:1 bobbin. You can also use the plying bobbin with this flyer.

    For Questions please E-mail Bee Hahn.

    Reading Material

    Bobbin Lead and Flyer Lead Explained

    Assembly Instructions

    1. Take current flyer off and install the Flyer Lead maiden.
    2. Put a bobbin on the NW Flyer with whorl and oil bearings of bobbin.
    3. Put the Flyer in place and oil the orifice and rear bearing.
    4. Put drive band over the whorl in front of the flyer and on the wheel. Look down from the top of the wheel to see that the whorl and wheel are lined up.
    5. Put the wonder tension (scotch tension) cable over the rear hub of the bobbin and tighten just a little bit. You will use this to get the proper draw in for your likes.
    6. Transfer orifice hook from old maiden to new maiden. Moved where you store the orifice hook to a ways back on the maiden
    7. Start spinning, if it pulls the yarn out of your hand loosen tension and if it does not want to draw in tighten just a little.
    8. If the maiden comes off when you lift the wheel put in a screw to hold it on.
    9. Have fun spinning fibers into yarn.
    Add to Cart
    $79.49
  • Flyer Lead Conversion Kit White (A104)

    Because of the numerous requests I received the Babe's Flyer Lead Wonder (scotch) Tension spinning wheel was invented, and does it every spin nice with easy adjustment to take up and easy to control the twist. The ratio of the whorl is 7:1

    The conversion kit consists of the maiden with Velcro, NW flyer with whorl and the wonder tension control. Bobbins are optional. Pictured with a standard 5:1 bobbin. You can also use the plying bobbin with this flyer.

    For Questions please E-mail Nels Wiberg.

    Reading Material

    Bobbin Lead and Flyer Lead Explained

    Assembly Instructions

    1. Take current flyer off and install the Flyer Lead maiden.
    2. Put a bobbin on the NW Flyer with whorl and oil bearings of bobbin.
    3. Put the Flyer in place and oil the orifice and rear bearing.
    4. Put drive band over the whorl in front of the flyer and on the wheel. Look down from the top of the wheel to see that the whorl and wheel are lined up.
    5. Put the wonder tension (scotch tension) cable over the rear hub of the bobbin and tighten just a little bit. You will use this to get the proper draw in for your likes.
    6. Transfer orifice hook from old maiden to new maiden. Moved where you store the orifice hook to a ways back on the maiden
    7. Start spinning, if it pulls the yarn out of your hand loosen tension and if it does not want to draw in tighten just a little.
    8. If the maiden comes off when you lift the wheel put in a screw to hold it on.
    9. Have fun spinning fibers into yarn.
    Add to Cart
    $74.95
  • Spindle for Fiber Starter,Production, Bulky (A112)

    This is a Spindle you can add to your spinning wheel by drilling a 1/4" hole through your present maiden or buy a maiden with the spindle.

    This is great for spinning those artistic yarns with button and bows, feathers, charms, beads and you name it.

    Add to Cart
    $34.95
  • Stepping stone (J17)
    Stepping stone for Fiber Starter, Production, Bulky.
    Add to Cart
    $46.95
Per Page      1 - 10 of 10